Spark

Transmission Rear Mount Bracket Replacement

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Using a suitable jack stand, support the rear of the powertrain.



3. Remove the transmission bracket mount to mount through bolt and nut (1).



4. Remove the transmission mount bracket bolts (1).
5. Remove the transmission mount bracket (2).

1. Install the transmission mount bracket (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the transmission mount bracket bolts (1), and tighten to 60 N·m (44 lb ft).



3. Install the transmission bracket mount to mount through bolt and nut (1) and tighten to 80 N·m (59 lb ft).
4. Remove the jack stand.
5. Lower the vehicle.