Spark

Transmission Mount Bracket Replacement - Left Side — with EN-50176

Special Tools

For equivalent regional tools, refer to Special Tools

1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Disconnect the reverse light switch connector.
3. Install the EN-49802 cradle supporter , EN-50176 powertrain support pallet and EN-50177 cradle supporter holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
4. Remove the transmission mount. Refer to Transmission Mount Replacement - Left Side : with CH-49290 → with EN-50176 .



5. Remove the left transmission mount bracket bolt (1).
6. Remove the left transmission mount bracket (2).

1. Install the left transmission mount bracket (2).

Caution: Refer to Fastener Caution in the Preface section.

2. Install the left transmission mount bracket bolts (1), and tighten to 60 N·m (44 lb ft).
3. Install the transmission mount. Refer to Transmission Mount Replacement - Left Side : with CH-49290 → with EN-50176 .
4. Remove the EN-49802 cradle supporter , EN-50176 powertrain support pallet and EN-50177 cradle supporter holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
5. Connect the reverse light switch connector.
6. Install the battery tray. Refer to Battery Tray Replacement .