Transmission Mount Replacement - Left Side — with CH-49290
Special Tools
• | CH-49290 Engine Support Tool |
For equivalent regional tools, refer to Special Tools .
Removal Procedure
- Remove the battery tray. Refer to Battery Tray Replacement .
Note: The SPX installation manual is supplied with the special tool and is also available online from SPX directly. Go to www.spxtools-shop.com.
- Assemble the CH-49290 engine support tool (1) according to the details provided in the SPX installation manual.
- Install the torque support (2) to the engine.
- Support the CH-904 base frame on a jack.
- Support the CH-49290 engine support tool on the CH-904 base frame.
Note: The SPX installation manual is supplied with the special tool and is also available online from SPX directly.
- Install the CH-49290 engine support tool (1) according to the details provided in the SPX installation manual.
- Remove the left transmission mount bolt (1) from the transmission mount bracket.
- Remove the left transmission mount nut (2) from the transmission mount bracket.
- Remove the left transmission mount to body bolts (1).
- Remove the transmission mount (2) from the vehicle.
Installation Procedure
- Install the transmission mount (2) to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the transmission mount to body bolts (1) and tighten to 50 N·m (37 lb ft).
- Install the left transmission mount nut (2) onto the transmission mount bracket and tighten to 75 N·m (55 lb ft).
- Install the left transmission mount bolt (1) onto the transmission mount bracket and tighten to 75 N·m (55 lb ft).
- Remove the CH-49290 engine support tool (1).
- Remove the CH-49290 engine support tool from the CH-904 base frame.
- Remove the CH-904 base frame from the jack.
- Disassemble the CH-49290 engine support tool (1).
- Remove the torque support (2) from the engine.
- Install the battery tray. Refer to Battery Tray Replacement .
© Copyright Chevrolet. All rights reserved |