Preliminary Procedure

Remove the tail lamps. Refer to Tail Lamp Replacement .

1

Rear Bumper Fascia Retainer (Qty: 2)

2

Rear Bumper Fascia Side Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

3

Rear Bumper Fascia Screw (Qty: 2)

Tighten
1.8 N·m (16 lb in)

4

Rear Bumper Fascia

Procedure

1. Unclip from rear bumper fascia guides.
2. Pull forward to remove the rear bumper fascia.
3. Disconnect any electrical connectors.
4. Transfer parts as needed.