To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Tail Lamp Replacement


2327670

Callout

Component Name

1

Tail Lamp Screw (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
2.5 N·m (22 lb in)

2

Tail Lamp Assembly

Procedure

  1. Using a blunt tool, tap gently on the tail lamp studs before attempting to remove the tail lamp assembly from the lamp pocket.
  2. Pull the tail lamp assembly rearward.
  3. Disconnect the tail lamp bulbs assembly electrical connector.

3

Tail Lamp Wiring Harness and Bulb Assembly

Warning: Refer to Halogen Bulb Warning in the Preface section.

Tip
Rotate the bulbs anti-clockwise and remove from the tail lamp housing.

   


© Copyright Chevrolet. All rights reserved