Preliminary Procedure

Remove the rear side door trim panel. Refer to Rear Side Door Trim Panel Replacement .

1

Rear Side Door Check Link Bolt

Caution: Refer to Fastener Caution in the Preface section.

Procedure

1. Remove the water deflector.
2. Disconnect the door electrical connector.
3. Support the door before removing the hinge bolts.
4. With the aid of an assistant, remove the door.

Tighten
28 N·m (21 lb ft)

2

Rear Side Door Lower Hinge Bolt (Qty: 2)

Tighten
28 N·m (21 lb ft)

3

Rear Side Door Upper Hinge Bolt (Qty: 2)

Tighten
28 N·m (21 lb ft)

4

Rear Side Door

Procedure

1. Transfer all of the internal components.
2. Adjust the rear side door as needed. Refer to Rear Side Door Adjustment .