To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Gear Outlet Pipe/Hose Replacement


2308600

Callout

Component Name

Preliminary Procedure

  1. Remove as much power steering fluid from the remote power steering fluid reservoir as possible.
  2. Place drain pans under the vehicle as needed.

1

Power Steering Gear Feed Tube Fitting

Caution: Refer to Fastener Caution in the Preface section.

Tighten
13 N·m (10 lb ft)

2

Power Steering Gear Outlet Pipe Fitting

Tighten
28 N·m (21 lb ft)

3

Power Steering Gear Outlet Pipe Clamp Nut

Tighten
9 N·m (80 lb ft)

4

Hose Clamp

Procedure

Compress the power steering fluid reservoir outlet hose clamp from the power steering fluid reservoir.

5

Power Steering Gear Outlet Hose

Procedure

Fill and bleed the power steering system. Refer to Power Steering System Bleeding .

Tip
Clean any excess power steering fluid from the vehicle.

   


© Copyright Chevrolet. All rights reserved