Preliminary Procedures

1. Remove the front seat. Refer to Driver or Passenger Seat Replacement .
2. Remove the front seat inner trim panel. Refer to Front Seat Cushion Inner Trim Panel Replacement .
3. Remove the front seat outer trim panel. Refer to Front Seat Cushion Outer Trim Panel Replacement .

1

Front Seat Back Cushion Frame Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
45 N·m (33 lb ft)

2

Front Seat Back Cushion Frame

Procedure

1. Disconnect electrical connectors as needed.
2. Remove the inflatable restraint side impact module. Refer to Driver or Passenger Seat Side Inflatable Restraint Module Replacement .
3. If replacing with a new front seat back frame, transfer components as necessary.