Preliminary Procedure

1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
2. Remove the front tyre and wheel assemblies. Refer to Tire and Wheel Removal and Installation .

1

Front Stabilizer shaft Link Nut (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tip
When removing the stabilizer shaft link nuts, remove both of the upper nuts first and then lift up the stabilizer bar ends in order to get the tool access to lower nuts.

Tighten
43 N·m (32 lb ft)

2

Front Stabiliser Shaft Link