To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Heated Oxygen Sensor Replacement - Sensor 2


2308935

Callout

Component Name

Preliminary Procedures

  1. Remove the exhaust manifold heat shield. Refer to Exhaust Manifold Heat Shield Replacement .
  2. Disconnect the heated oxygen sensor 2 wiring harness connector.

1

Heated Oxygen Sensor 2

Caution: Refer to Component Fastener Tightening Caution in the Preface section.

Tighten
41 N·m (30.2 lb ft)

   


© Copyright Chevrolet. All rights reserved