To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Pressure Relief

Warning: Relieve the fuel system pressure before servicing fuel system components in order to reduce the risk of fire and personal injury.

After relieving the system pressure, a small amount of fuel may be released when servicing the fuel lines or connections. In order to reduce the chance of personal injury, cover the regulator and the fuel line fittings with a shop towel before disconnecting. This will catch any fuel that may leak out. Place the towel in an approved container when the disconnection is complete.

  1. Open the fuel cap.
  2. Remove the fuel pump fuse from the engine room fuse box.
  3. Ignition on and allow the engine to idle until the engine stops.
  4. After ignition OFF, crank the engine for 10 seconds to verify that there is no fuel.
   


© Copyright Chevrolet. All rights reserved