To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Ignition Coil Replacement

Removal Procedure

    2327598
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the ignition cable.
  3. Disconnect the ignition coil connector.

    4. 2327596
  4. Remove the ignition coil retaining bolt.
  5. Remove the ignition coil.

    6. 2327595
  6. Remove the ignition coil bracket retaining bolt.
  7. Remove the ignition coil bracket.

Installation Procedure

    2327595
  1. Install the ignition coil bracket.

    2. Caution: Refer to Fastener Caution in the Preface section.

  2. Install the ignition coil bracket retaining bolt and tighten to 10 N·m (88.5 lb in).

    3. 2327596
  3. Install the ignition coil.
  4. Install the ignition coil retaining bolt and tighten to 10 N·m (88.5 lb in).

    5. 2327598
  5. Connect the ignition coil connector.
  6. Connect the ignition coil.
  7. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
   


© Copyright Chevrolet. All rights reserved