Spark

Exhaust Gas Recirculation Valve Replacement

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Disconnect the exhaust gas recirculation (EGR) valve connector.
3. Remove the EGR valve mounting bolt.
4. Remove the EGR valve.

1. Install the EGR valve.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the EGR valve mounting bolt and tighten to 30 N·m (22.1 lb ft).
3. Connect the EGR valve connector.
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .