Preliminary Procedures

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the control valve body cover. Refer to Control Valve Body Cover Replacement .

1

Torque Converter Clutch Solenoid Valve Nut (Qty: 1)

Caution: Refer to Fastener Caution in the Preface section.

Procedure

Disconnect the torque converter clutch solenoid valve electrical connector.

Tighten
8 N·m (71 lb in)

2

Torque Converter Clutch Solenoid Valve Bolt (Qty: 1)

Tighten
8 N·m (71 lb in)

3

Torque Converter Clutch Solenoid Valve