Spark

Transmission Mount Bracket Replacement - Left Side — with EN-50176

Special Tools

For equivalent regional tools, refer to Special Tools .

1. Remove the battery tray. Refer to Battery Tray Replacement .
2. Install the EN-49802 supporter, EN-50176 pallet and EN-50177 holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
3. Remove the left transmission mount. Refer to Transmission Mount Replacement - Left Side : with CH-49290 → with EN-50176 .



4. Remove the left transmission mount bracket bolts (1).
5. Remove the left transmission mount bracket (2) from the vehicle.

1. Install the left transmission mount bracket (2) to the vehicle.

Caution: Refer to Fastener Caution in the Preface section.

2. Install the left transmission mount bracket bolts (1) and tighten to 60 N·m (44 lb ft).
3. Remove the EN-49802 supporter, EN-50176 pallet and EN-50177 holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
4. Install the battery tray. Refer to Battery Tray Replacement .