Transmission Mount Replacement - Left Side — with EN-50176
Special Tools
• | EN-49802 Cradle Supporter |
• | EN-50176 Powertrain Support Pallet |
• | EN-50177 Cradle Supporter Holder |
For equivalent regional tools, refer to Special Tools .
Removal Procedure
- Remove the battery tray. Refer to Battery Tray Replacement .
- Install the EN-49802 supporter, EN-50176 pallet and EN-50177 holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
- Remove the left transmission mount bolt and nut (1) from the transmission mount bracket (2).
- Remove the left transmission mount to body bolts (1).
- Remove the left transmission mount (2) from the vehicle.
Installation Procedure
- Install the left transmission mount (2) to the vehicle.
Caution: Refer to Fastener Caution in the Preface section.
- Install the left transmission mount to body bolts (1) and tighten to 50 N·m (37 lb ft).
- Install the left transmission mount bolt and nut (1) to the transmission mount bracket (2) and tighten to 75 N·m (55 lb ft).
- Remove the EN-49802 supporter, EN-50176 pallet and EN-50177 holder. Refer to Engine/Transmission Mounting : with CH-49289 and CH-49290 → with EN-49802 and EN-50176 .
- Install the battery tray. Refer to Battery Tray Replacement .
© Copyright Chevrolet. All rights reserved |