Spark

Engine Front Cover and Oil Pump Removal

Note: Note the different screw lengths.

1. Remove the bolts (2, 3, 4).

Note: Do not damage the sealing surfaces.

2. Remove the engine front cover with the included oil pump (4).

Note: There are no serviceable components within the oil pump. Disassemble the pump only to diagnose an oiling concern. A disassembled oil pump must not be reused. A disassembled oil pump must be replaced.

3. Clean the sealing surface.



4. Remove the oil pump screws (3).
5. Remove the oil pump (1).
6. Remove the clip, holding the cap for the oil relief valve components.
7. Remove the cap, spring and plunger (2), from the oil pump housing (1).