To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Power Steering Pump Belt Installation

  1. Install the power steering pump belt.

    2. 2308316
  2. Pull the power steering pump to the marking on the power steering pump bracket with bolt.

    3. Caution: Refer to Fastener Caution in the Preface section.

  3. Tighten the bolt (1) to 22 N·m (16 lb ft).

    4. 2308320
  4. Install the bolts (1) and tighten to 22 N·m (16 lb ft).
  5. Check the belt is installed clearly.
   


© Copyright Chevrolet. All rights reserved