To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Flywheel Installation

Special Tools

EN 50050 Crankshaft Locking Device

For equivalent regional tools, refer to Special Tools .


    2308782
  1. Install the flywheel (3).
  2. Install the 6 flywheel bolts (1, 2).

    3. 2308806
  3. Install the EN 50050 crankshaft locking device, lock the flywheel via the starter ring gear.

    4. Caution: Refer to Fastener Caution in the Preface section.

  4. Tighten the 6 flywheel bolts to 20 N·m + 25° (15 lb ft + 25°).
  5. Remove the EN 50050 crankshaft locking device .
   


© Copyright Chevrolet. All rights reserved