Spark

Intake Manifold Tuning Valve Replacement

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Disconnect the wiring harness and IMRC valve solenoid inlet and outlet hose.
3. Remove the IMRC valve solenoid retaining bolt.
4. Remove the IMRC valve solenoid.

Caution: Refer to Fastener Caution in the Preface section.




1. Install the IMRC valve solenoid retaining bolt and tighten to 6.5 N·m (57.5 lb in).
2. Connect the wiring harness and IMRC valve solenoid inlet and outlet hose.
3. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .