Spark |
||||||||
|
|
|
|||||||
| Table 1: | Keyless Entry Control Module Scan Tool Output Controls |
Parameter | Expected Value | Description |
|---|---|---|
Operating Conditions: Ignition ON | ||
Key in Ignition Lock Signal | Active/Inactive | The scan tool displays Active or Inactive. This is the state of the key in ignition switch. |
Ignition 1 Signal | RPM | This parameter displays the rotational speed of the engine expressed as revolutions per minute. |
Driver Door Key Unlock Switch Signal | Active/Inactive | This parameter indicates if the driver door is locked or unlocked. |
Passenger Door Key Unlock Switch Signal | Active/Inactive | This parameter indicates if the passenger door is locked or unlocked. |
Door Ajar Switch | Active/Inactive | This parameter indicates that the door is ajar; it is open, but the safety catch is engaged. |
Bonnet Open Switch | Active/Inactive | This parameter indicates that the bonnet is ajar; it is open, but the safety catch is engaged. |
Rear Closure Status | Varies | This switch indicates if the rear closure of the vehicle is ajar. |
Output Control | Description |
|---|---|
Exterior Lamp Flash | This output control is used to turn ON or OFF the exterior lamp depending on this control when the door is unlocked by the key transmitter. |
| © Copyright Chevrolet. All rights reserved |
