Spark

Crankshaft Rear Oil Seal Installation

Special Tools

EN-46777 Installer Crankshaft Rear Oil Seal

For equivalent regional tools, refer to Special Tools

1. Place EN-46777-20 Installer (1) on EN-46777-10 Installer (3).
2. Slide the crankshaft rear oil seal (2) across EN-46777-20 Installer  (1) onto EN-46777-10 Installer  (3).
3. Remove EN-46777-20 Installer (1) from EN-46777-10 Installer (3).




Note: Use a mallet to install the crankshaft rear oil seal into the proper position.

4. Install the crankshaft rear oil seal (1) with EN-46777-10 Installer  (2).