To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Vacuum Pump Installation


    2190824
  1. Install the power brake booster pump gasket.
  2. Note: Do not tilt the power brake booster pump actuator at timing gear groove (3).

  3. Install the power brake booster pump (1).
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 2 power brake booster pump bolts (2) and tighten to 25 N·m (18 lb ft).
   


© Copyright Chevrolet. All rights reserved