To the top of the document
Spark
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Gas Recirculation Pipe Installation


    2190509
  1. Install a NEW exhaust gas recirculation pipe gasket (4).
  2. Install the exhaust gas recirculation pipe seal (2).
  3. Install the exhaust gas recirculation pipe (3).
  4. Caution: Refer to Fastener Caution in the Preface section.

  5. Install the 3 exhaust gas recirculation pipe bolts (5) to the intake manifold and tighten to 10 N·m (89 lb in).
  6. Install the 2 exhaust gas recirculation pipe bolts (1) to the exhaust gas recirculation valve cooler and tighten to 25 N·m (18 lb ft).
   


© Copyright Chevrolet. All rights reserved