Spark

Crankshaft Pulley Installation

Note: Ensure that the Logo is towards front side of the engine.

1. Install the crankshaft pulley (1).

Caution: Refer to Fastener Caution in the Preface section.

Note: Use the centring bolt (2) to hold the pulley (1).

2. Install the 4 crankshaft pulley bolts (3) and tighten in first step to 10 N·m (89 lb in).
3. Tighten the 4 crankshaft pulley bolts (3) to final torque in a cross sequence to 25 N·m (18 lb ft).