Service Information

Captiva

Disc Brake System Description and Operation

System Component Description

The disc brake system consists of the following components:

Disc Brake Pads: Applies mechanical output force from the hydraulic brake callipers to friction surfaces of brake rotors.

Disc Brake Rotors: Uses mechanical output force applied to friction surfaces from the disc brake pads to slow speed of tyre and wheel assembly rotation.

Disc Brake Pad Hardware: Secures disc brake pads firmly in proper relationship to the hydraulic brake callipers. Enables a sliding motion of brake pads when mechanical output force is applied.

Disc Brake Calliper Hardware: Provides mounting for hydraulic brake calliper and secures the calliper firmly in proper relationship to calliper bracket. Enables a sliding motion of the brake calliper to the brake pads when mechanical output force is applied.

System Operation

Mechanical output force is applied from the hydraulic brake calliper pistons to the inner brake pads. As the pistons press the inner brake pads outward, the calliper housings draw the outer brake pads inward. This allows the output force to be equally distributed. The brake pads apply the output force to the friction surfaces on both sides of the brake discs, which slows the rotation of the tyre and wheel assemblies. The correct function of both the brake pad and brake calliper hardware is essential for even distribution of braking force.