Preliminary Procedures

1. Clean all components in cleaning solvent and air dry.
2. The transfer case internal components are not to be serviced. If internal components other than seals are damaged, the transfer case must be replaced.

1

Transfer Case Input Shaft Gear

Tip
Inspect for pitting, excessive wear, or damage.

2

Transfer Case Rear Output Drive Shaft Gear

Tip
Inspect for pitting, excessive wear, or damage.

3

Transfer Case Input Shaft Bearing Assembly

Tip
Inspect bearings for roughness, spalling, or pitting.

4

Transfer Case Rear Output Drive Shaft Bearing Assembly

Tip
Inspect bearings for roughness, spalling, or pitting.