To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Front Cover Assemble

Special Tools

    • EN 29184 Oil Seal Installer
    • EN 46103 Camshaft Actuator Valve Seal Installer

For equivalent regional tools, refer to Special Tools .


    1211008

    Important: Do not lubricate the crankshaft front oil seal or crankshaft balancer sealing surfaces. The crankshaft balancer is installed into a dry seal.

  1. Install the NEW crankshaft front oil seal into the engine front cover using the EN 29184 installer.

  2. 1579266
  3. Place the seal into position with the notches (1) in the seal down. The notches (1) will face inboard when properly installed.

  4. 1211011
  5. Install the NEW camshaft position actuator valve oil seals into the engine front cover using the EN 46103 installer.
   


© Copyright Chevrolet. All rights reserved