To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Fuel Tank Pressure Sensor Replacement - LE5

Removal Procedure


    1885236
  1. Remove the fuel tank. Refer to Fuel Tank Replacement : FWD  → AWD .
  2. Disconnect the fuel tank wiring harness electrical connector (1) from the fuel tank pressure sensor.

  3. 1885238
  4. Disengage the retaining tab (1) securing the fuel tank pressure sensor.
  5. Carefully lift and remove the fuel tank pressure sensor (2) from the fuel pump module.

Installation Procedure


    1885238
  1. Install the fuel tank pressure sensor (2) to the fuel pump module assembly until the sensor engages the retaining tab (1).

  2. 1885236
  3. Connect the fuel tank wiring harness electrical connector (1) to the fuel tank pressure sensor.
  4. Install the fuel tank. Refer to Fuel Tank Replacement : FWD  → AWD .
   


© Copyright Chevrolet. All rights reserved