Service Information

Captiva

Manual Shift Detent Lever with Shaft Position Switch Assembly and Park Pawl Actuator Removal

Table 1:	Manual Shaft Detent (w/Shift Position Switch) Lever Assembly Removal
Table 2:	Park Pawl Actuator Guide Removal

Callout

Component Name

Manual Shaft Detent Lever Hub Pin

Tip
Use side cutter to remove the pin (1) and discard.

Manual Shift Shaft Pin

Tip
Discard the pin. It is not reusable.

•	DT-23129 Universal Seal Remover

•	GE-6125-1B Slide Hammer

For equivalent regional tools, refer to Special Tools .

Manual Shaft

Manual Shaft Detent (w/Shift Position Switch) Lever Assembly

Park Pawl Actuator Assembly

Callout	Component Name
1	Park Pawl Actuator Guide Pin Tip Use side cutter to remove the pin (1) and discard.
2	Park Pawl Actuator Guide Assembly
3	Park Pawl Actuator Guide Assembly Seal Tip Discard the seal. It is not reusable.

Callout

Component Name

Park Pawl Actuator Guide Pin

Tip
Use side cutter to remove the pin (1) and discard.

Park Pawl Actuator Guide Assembly

Park Pawl Actuator Guide Assembly Seal

Tip
Discard the seal. It is not reusable.