Captiva

Oil Level Indicator Tube Replacement

1. Turn the ignition OFF.
2. Remove the oil level indicator from the oil level indicator tube.
3. If equipped with LCS Remove the engine compartment fuse block and bracket. Refer to Underhood Electrical Center or Junction Block Replacement
4. Remove the oil level indicator tube bolt .
5. Remove the oil level indicator tube up through the exhaust manifold.
6. If replacing only the oil level indicator tube seal, remove and discard the old seal.

1. Install a new seal on the oil level indicator tube.
2. Install the oil level indicator tube.

Caution: Refer to Fastener Caution in the Preface section.

3. Install the oil level indicator tube bolt and tighten to 10 N·m (89 lb in).
4. Install the oil level indicator in the oil level indicator tube.