Preliminary Procedure

Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement : LE5 or LE9

1

Fastener (Qty: 2)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Camshaft Position Actuator Solenoid Valve Replacement

Procedure

1. Disconnect the camshaft position actuator solenoid valve harness connector.
2. Clean the cylinder head mating surfaces before assembly.
3. Lubricate the camshaft position actuator solenoid valve O-ring seals with clean engine oil.

Tip
Replace only the Intake or exhaust camshaft position actuator solenoid as necessary.