Callout
| Component Name
|
Preliminary Procedures
- Relieve the fuel system pressure. Refer to Fuel Pressure Relief .
- Remove the intake manifold cover. Refer to Intake Manifold Cover Replacement .
- Remove the fuel pipe shield. Refer to
Fuel Pipe Shield Replacement : LF1 or LFW .
- Disconnect the fuel feed line quick connect. Refer to Metal Collar Quick Connect Fitting Service .
|
1
| Fitting (Qty: 1)
Caution: Refer to Fastener Caution in the Preface section.
Tighten 28 N·m (20 lb ft) |
2
| Bolt (Qty: 2)
Tighten 50 N·m (28 lb ft) |
3
| Fuel Feed Pipe
Procedure
- DISCARD the pipe when removed, and install a NEW pipe.
- Ensure that the high pressure fuel pipe, and fuel pump fittings are clean and dry prior to assembly.
- Pressure up the fuel system and check for leaks.
|