To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Inlet Manifold Installation - LF1, LFW or LFX


    2202023
  1. Install the NEW intake manifold gasket (1).

    2. 2201963
  2. Install the intake manifold assembly (2).
  3. Install the intake manifold bolts (1).

    4. Caution: Refer to Fastener Caution in the Preface section.


    2202066
  4. Tighten the intake manifold bolts in the sequence shown.
  5. Tighten the intake manifold bolts in sequence to 25 N·m (18 lb ft).
  6. Tighten the intake manifold bolts a second pass in sequence to 25 N·m (18 lb ft).

    7. 2201957
  7. Install the fuel pump cover (2).
  8. Install the fuel pump cover bolt (1) and tighten to 10 N·m (89 lb in).

    9. 2201953
  9. Connect the evaporative (EVAP) hose to the upper intake manifold and EVAP solenoid.

    10. 2201943
  10. Connect the positive crankcase ventilation (PCV) tube assembly (1) to the upper intake manifold and the right camshaft cover.
   


© Copyright Chevrolet. All rights reserved