1

Rear Side Door Outer Sealing Strip Screw

Caution: Refer to Fastener Caution in the Preface section.

Tip
One screw is located at each end of the outer sealing strip.

Tighten
1.5 N·m (13 lb in)

2

Rear Side Door Outer Sealing Strip

Procedure

1. Remove by lifting up on seal starting at the rear and working forward.
2. When re-installing, align outer seal fastener location with hole in door structure and outer panel retaining tabs.
3. Start at rear of belt seal, push down onto flange until fully seated.