Captiva

Blower Motor Relay Replacement

Warning: Refer to Battery Disconnect Warning in the Preface section.





Note: The left-hand drive is shown. The right-hand drive is similar.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. The relay is located in front of the blower motor.
3. Remove the instrument panel storage compartment. Refer to Instrument Panel Compartment Replacement : Long Body  → Short Body .
4. Separate the relay from the connector.
5. Remove the screw with the high-blower relay.

1. Install the screw with the high-blower relay.
2. Connect the electrical connector.
3. Install the instrument panel storage compartment. Refer to Instrument Panel Compartment Replacement : Long Body  → Short Body .
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .