Preliminary Procedures

1. Remove the front seat back cushion cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement : Without KA1  → With KA1 .
2. Remove the front seat cushion cover and pad. Refer to Front Seat Cushion Cover and Pad Replacement : With KA1  → Without KA1 .

1

Front Seat Back Frame Bolt (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
50 N·m (37 lb ft)

2

Driver Seat Cushion Frame

Procedure

1. Disconnect the electrical connector.
2. If replacing the driver seat cushion frame transfer components as necessary.