Preliminary Procedures

1. Open either the driver or passenger door to assist in removal of the lower door moulding.
2. Remove the 2 front side door lower moulding nuts securing the moulding to the inner door.

1

Lower Door Moulding Locator Bolt/Pin (Qty: 2)

Procedure

1. Align the outer pins to the door.
2. Align the retainers and apply pressure to the exterior lower door moulding to seat.
3. Install the front side door lower moulding nuts and finger tighten.

2

Lower Door Moulding Retainer (Qty: 15)

Procedure

Release the lower retainers working upward on the moulding.

3

Lower Door Moulding Assembly

Tip
Ensure the door is in the closed position prior to installing the lower moulding to the door.