Preliminary Procedures

1. Remove the rear wheelhouse liner. Refer to Rear Wheelhouse Panel Liner Replacement .
2. Remove the inner rear bumper fascia bracket, forward screw.
3. Release the retainers from the wheel opening moulding.
4. Remove the rear wheel opening moulding from the vehicle.

1

Rear Wheel Opening Moulding Retainer (Qty: 10)

Tip
Replace any damaged or broken retainers upon re-assembly of the moulding to the vehicle.

2

Rear Wheel Opening Molding

3

Rear Wheel Opening Moulding Alignment Pin