To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Automatic A/C Engine Coolant Temperature Sensor Replacement

Removal Procedure (Left-Hand Drive Shown, Right-Hand Drive Similar)

    Warning: Refer to Battery Disconnect Warning in the Preface section.


    1785914
  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
  2. Remove the instrument panel storage compartment. Refer to Instrument Panel Compartment Replacement : Long Body  → Short Body .
  3. Turn the sensor (1) to release it from the air conditioning module.
  4. Disconnect the electrical connector.

Installation Procedure


    1785914
  1. Install the coolant temperature sensor (1) into the air conditioning module and turn the sensor to lock it.
  2. Connect the electrical connector.
  3. Install the instrument panel storage compartment. Refer to Instrument Panel Compartment Replacement : Long Body  → Short Body .
  4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
   


© Copyright Chevrolet. All rights reserved