Captiva

Mobile Telephone Control Module Replacement

Note: Left - Hand Drive Shown, Right - Hand Drive Similar.

1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .
2. Remove the floor console. Refer to Front Floor Console Replacement : Short Body  → Long Body .



3. Disconnect the electrical connector.
4. Remove the mobile telephone module from the bracket.

Note: Perform the programming when the mobile telephone module is being replaced.

1. Install the mobile telephone module into the bracket.
2. Connect the electrical connector.
3. Install the floor console. Refer to Front Floor Console Replacement : Short Body  → Long Body .
4. Connect the negative battery cable. Refer to Battery Negative Cable Disconnection and Connection .