To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Block Disassemble


    2296303
  1. Remove the engine front cover studs (1).

    2. 1930194
  2. Remove the block heater cartridge, if equipped.

    3. 1930195
  3. Remove the right knock sensor bolt .
  4. Remove the right knock sensor .

    5. 1930214
  5. Remove the left knock sensor bolt .
  6. Remove the left knock sensor .

    7. 1930246
  7. Remove the crankshaft position sensor bolt.
  8. Remove the crankshaft position sensor.

    9. 1930269
  9. Remove the crankshaft position sensor O-ring, if damaged.

    10. 1866877
  10. Remove oil jet bolts.
  11. Remove oil jets.

    12. 902732
  12. Remove the right front sump rail oil gallery expansion plug.

    13. 902740
  13. Remove the cylinder block-to-sump alignment dowels.

    14. 1327922
  14. Remove the M14 right side oil gallery threaded plug.

    15. 1327923
  15. Remove the M14 right side coolant drain threaded plug.

    16. 1327924
  16. Remove the M14 rear oil gallery threaded plug.

    17. 1327925
  17. Remove the M14 left side coolant drain threaded plug.

    18. 1327926
  18. Remove the M20 left side oil gallery threaded plug.

    19. 902733
  19. Remove the coolant expansion plugs.

    20. 902737
  20. Remove the cylinder block-to-transmission alignment dowels.

    21. 902730
  21. Remove the front oil gallery expansion plug.

    22. 902736
  22. Remove the cylinder block-to-cylinder head alignment dowels.
   


© Copyright Chevrolet. All rights reserved