To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Camshaft Position Actuator Removal - Right Side Intake

    Caution: Refer to Torque Reaction Against Timing Drive Chain Caution in the Preface section.


    1852277
  1. Use an open wrench on the hex cast into the camshaft in order to prevent engine rotation when loosening the camshaft position actuator bolt .
  2. Remove the right inlet camshaft position actuator bolt (1).
  3. Remove the right intake camshaft position actuator (2).
  4. Remove the camshaft thrust washer if applicable (3).
   


© Copyright Chevrolet. All rights reserved