Captiva

Power Window Reinitialisation

A window motor that has not been normalised will no longer perform the express up and express down functions, this may occur during the following conditions:

To normalise the window motor, follow these steps:

1. Ignition ON.
2. Starting with the window completely UP, press and hold the power window switch until the window is fully open and continue holding the switch down for approximately 5 seconds after the window is completely open.
3. Pull the power window switch up until the window is fully closed and continue holding the switch up for approximately 5 seconds after the window is completely closed.

The window should now be normalised and the window should perform the express up and express down functions.