To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Cylinder Head Assemble


    2469617

    Note: 

       • If the valves have been used in a running engine, you must clean the valve seats before reassembly.
       • Coat the valve shafts with NEW engine oil.
       • Take extreme care to prevent damage to the valve guides.

  1. Install the valves (5).

  2. 2469619
  3. Install NEW valve stem oil seals using the EN-46116 installer (1).

  4. 2469617
  5. Install the valve springs (3).
  6. Install the valve spring retainers (2).

  7. 2469615

    Warning: Compressed valve springs have high tension against the valve spring compressor. Valve springs that are not properly compressed by or released from the valve spring compressor can be ejected from the valve spring compressor with intense force. Use care when compressing or releasing the valve spring with the valve spring compressor and when removing or installing the valve stem keys. Failing to use care may cause personal injury.

    Note: Take extreme care to prevent damage to the valve guides.

  8. Install the EN-48246 compressor (1) with EN-48247 adapter (2).

  9. 2469617
  10. Install the 32 valve stem keys (1).
   


© Copyright Chevrolet. All rights reserved