To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Engine Mount Bracket Installation - LNP


    2469473
  1. Install the engine mount bracket (4).
  2. Caution: Refer to Fastener Caution in the Preface section.

  3. Install the engine mount bracket mounting bolts (3) and tighten to 58 N·m (42.7 lb ft).
  4. Install the drive belt lower idler pulley (2). Refer to Drive Belt Idler Pulley Installation - Lower .
  5. Install the drive belt upper idler pulley (1). Refer to Drive Belt Idler Pulley Installation - Upper .
   


© Copyright Chevrolet. All rights reserved