Service Information

Captiva

Inlet Air Pressure and Temperature Sensor Replacement

Callout	Component Name
Preliminary Procedure Remove the engine sight shield. Refer to Engine Sight Shield Replacement .
1	Intake Air Pressure and Temperature Sensor Fastener Caution: Refer to Fastener Caution in the Preface section. Tighten 9 N·m (84 lb in)
2	Intake Air Pressure and Temperature Sensor Procedure Disconnect the electrical connector.

Callout

Component Name

Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

Intake Air Pressure and Temperature Sensor Fastener

Caution: Refer to Fastener Caution in the Preface section.

Tighten
9 N·m (84 lb in)

Intake Air Pressure and Temperature Sensor

Disconnect the electrical connector.