To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Exhaust Temperature Sensor Replacement - Position 1


2473951

Callout

Component Name

Preliminary Procedure

Remove the engine sight shield. Refer to Engine Sight Shield Replacement .

1

Turbo Heat Shield Fastener (Qty: 4)

Caution: Refer to Fastener Caution in the Preface section.

Tighten
10 N·m (89 lb in)

2

Turbo Heat Shield

3

Exhaust Temperature Sensor - Position 1

Caution: Refer to Heated Oxygen and Oxygen Sensor Caution in the Preface section.

Procedure

Remove and install the exhaust temperature sensor using the EN-50429 adapter .

Tighten
45 N·m (33 lb ft)

Special Tools

EN-50429 Exhaust Temperature Sensor Adapter

For equivalent regional tools, refer to Special Tools .

   


© Copyright Chevrolet. All rights reserved