Captiva |
||||||||
|
|
|
|||||||
| • | Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
| • | Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
| • | Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
When the ignition is turned ON, the advance parking assist control module receives the vehicle identification number (VIN) from the body control module. The advance parking assist control module will compare the VIN received to the VIN stored in memory.
Ignition voltage is between 9-16 V.
The VIN stored in the advance parking assist control module does not match the received VIN.
| • | The parking assist is disabled. |
| • | The cluster displays service park assist symbol. |
The VIN stored in the advance parking assist control module matches the VIN stored in the body control module.
Object Detection Description and Operation : C140/Long Body UFR or UD7 → C145/Short Body UFR → Rear Vision Camera → Holden Genuine Accessory(Aftermarket)
Control Module References for scan tool information
Ignition ON, program the K86 advance parking assist control module and verify the DTC does not reset.
| ⇒ | If the DTC is reset, replace the K86 advance parking assist control module. |
Perform the Diagnostic Repair Verification after completing the diagnostic procedure.
Control Module References for advance parking assist control module replacement, programming and setup
| © Copyright Chevrolet. All rights reserved |
