To the top of the document
Captiva
   
GMDE Start Page Load static TOC Load dynamic TOC Help?

Crankshaft Rear Oil Seal Installation - LE5 or LE9

Special Tools

EN-42067 Rear Main Seal Installer

For equivalent regional tools, refer to Special Tools : LE5 or LE9 .


    2146374
  1. Remove excess sealer from seal recess.
  2. Lubricate the outside diameter of the new crankshaft seal with clean engine oil.
  3. Using the EN-42067 installer (1), press the new crankshaft seal into the housing. The EN-42067 installer also establishes the depth of the seal in the crankshaft seal bore.
   


© Copyright Chevrolet. All rights reserved